Made to Measure Coldrooms

No limit to capacity, modular panels can be linked together in vertually any combination of widths and lengths.  Panels of different widths further increase the possibilities.  TSSC cold store can hold controlled tempeatures ranging from -40ºC to +18ºC depending on the specifications of the client.

The major applications are:
  1. Walk-in commercial coldrooms;
  2. Warehouse coldstorage;
  3. Portable skid mounted coldrooms;
  4. Offshore refrigerated containers;
  5. Partition panels.


 Construction


Panels are insulated with 40kgs (other densities also possible ) of CFC free polyurethane of approved pre-mixed system, injected by a high pressure mixer, between cladding as per choice of customer and are locked securely together with camlocks with steel hooks.  The result is an extremely durable structure with high thermal insulation.


Insulated panel thickness and length is according to specifications and drawings.  The standard panel 1150-1200 mm approximately and the thickness 50 mm to 200mm.  Each single panel length can be up to 13 meters (height).

Camlocks are moulded and permanently anchored in the injected rigid CFC free polyurethane foam core during the manufacturing process of sandwich elements.  They are are tightly joined by a tongue and groove system into a monolithic assembly.  Assembly is performed from the interior simply by turning with a hex wrench the locking arm of the camlock in one panel, which engages the pin in the adjacent panel.  The camlock action drums the two panels tightly together.

The tongue and the groove edges assure positive alignments of all elements.  TSSC modular insulated rooms are easily added to at any future time or taken apart and reassembled in another location.

Finish

The following claddings are available :

  1. Pre-painted Galvanised Steel
  2. Plastisol (PVC) Coated GI Steel
  3. Stainless Steel
  4. Stucco Aluminium

The cladding is precisely formed at edges in “u” shape and has shallow ribs 30 mm wide at 75 mm c.c. (non ribbed panels also available).  Wall and corner panels are available in a wide range of heights and designed to partition multi-compartment arrangements.

TSSC can supply industrial type modular coldstorage or commercial walk-in coldroom facilities with rounded internal wall edges for sanitary purposes.  Ceiling and floor panels are of the same width as wall panels and in lengths upto 4 meters.  Floor panels will support uniformly distributed load upto 2.5 tons per square meter.

Handcarts, hand tucks and other manually operated handling equipment can be used as the plywood reinforcement distributes the load and protects against impact damage.  The plywood can be either marine plywood or water boiled plywood (standard).  Where power equipment such as forklifts are used, a minimum 4 inch of reinforced poured and reinforced concrete should top the floor over TSSC PU. slabs.

For large low temperature coldstore applications, TSSC recommends and can assist in the design of underground pipe ventilation system to prevent any ice formation, which may accumulate underneath the coldstore (to be constructed by the civil contractor).  In the case of low temperature applications, TSSC can supply a floor mat heater, as an extra accessory, to place under the coldstore floor.

Go page up   Go to Next Page >>>>